CS3516 - Digital Home Processors

The Cortina CS3516 Network Processor provides superior performance and functionality for Router Gateway, NAS, IP Set Top Box, VoIP and other SME and SOHO applications. The device has single 32-bit ARM9 RISC Processors with up to 400 MIPS total performance. The device integrates a full featured hardware crypto engine, two 10/100/1000 Ethernet MACs, dual USB 2.0 hosts or clients, dual IDE or SATA interfaces, a 66 MHz 32-bit PCI interface, and direct interfaces to color LCD and SLIC modules. The device also includes an intelligent and programmable power management unit for portable system applications.

The Security Acceleration Engine has a performance of over 600/200 Mbps running DES/3DES and 237/197/169Mbps running 128/192/256bits AES. This Security Acceleration Engine also performs hardware acceleration on CCMP and RC4 encryption; SHA1, MD5, HMAC-SHA1, and HMAC-MD5 authentication. The hardware crypto engine in the Cortina CS3516 allows data encryption on network storage, DRM in multimedia IP protection, and VPN to run at full wire speed.

The embedded dual 10/100/1000 MACs with the industry standard MII and RGMII allow the system integrators the flexibility of configuring a traditional NAS server system with one or two channel 10/100/1000 Ethernet PHYs, or a NAS server plus router gateway capabilities with one WAN port and one LAN port. The Layer 2-4 hardware switching and Layer 2-7 packet classification enable high-end router gateway designs for the Fiber-to-the-Home, EPON and GPON, and other high speed internet infrastructures carrying data, voice, video and on-line commerce and gaming services.

The dual IDE cores, single IDE physical interface and dual SATA interfaces allow high performance data throughput and hard drive selection flexibility. The attached hardware XOR engine enables wire-speed RAID5 operations.

Performance enhancing hardware acceleration circuitries are included in the EMAC, DDR controller, and IDE control modules. The complete hardware acceleration engine improves the overall throughput in TCP/IP/UDP transmit, receive, and SAMBA read and write operations without the intervention of the CPU.

The dual USB 2.0, configurable to be the host or client by pin configurationor software, allows maximum flexibility in peripheral device integration, such as flash memory, USB control devices, and USB 2.0 hard drives.  

The PCI bus supports four master devices. The system integrator can add MPEG encoder, decoder, WiFi 802.11a/b/g/n access point or client functions, and other devices to deliver a complete wireless IP Set Top Box or Media Server product.
Applications
  • Router Gateway

  • NAS

  • IP Set Top Box

  • VoIP

  • Other SME and SOHO applications
Features and Benefits
CS3516 Features and Benefits Table
FeaturesBenefits
Single 32-bit 400 MIPS ARM9 RISC processor with separate embedded MMU and 8 K/16 K data/instruction cacheConfigurable external memory interfaces provide system integrators maximum flexibility to achieve best price performance ratio
Dual AHB with aggregate peak performance of greater than 10.6 Gbps for wire-speed operationIntegrated SATA interfaces provides significant performance gain and cost reduction compared to discrete IDE and SATA bridge devices
Supports 64 MB of parallel NOR flash memory or unlimited serial NAND flashDual USB 2.0 supports versatile peripheral device interface and storage extension
Cortina proprietary buffer pre-fetch DDR controllerDual USB 2.0 supports versatile peripheral device interface and storage extension
Supports 512 MB 32-bit or 16-bit 333 MHz (PC2700) of external DDR SDRAMDual Ethernet MACs enables high availability system design or superior WAN to LAN throughput
Dual IDE modulesUp to 2 Gps full duplex Layer2 switching
Supports single Ultra-133 IDE or dual SATAUp to 1 Gbps NAT throughput
Hardware XOR RAID engine to support RAID5Programmable QoS handling with 4 transmit queues and 16 receive queues enables priority management and processing of different types of traffic
Dual USB 2.0 selectable host or slaveTCP/IP/UDP processing assisted by a proprietary hardware acceleration engine significantly improves overall network and file transfer throughput
Dual IEEE 802.3 compliant Ethernet MACs with 10/100 MII and 10/100/1000 RGMIIThe built-in hardware security accelerator engine enables significant performance improvement in VPN tunneling, IPSec and secure file transfers by processing packet encryption, decryption, hashing and authentication functions in hardware
Layer 2/3/4 hardware switching, routing and NAT with 4 transmit queues per port for QoS supportHPI interface allows simple connection with merchant DSP devices to implement custom VoIP gateway systems
Layer 2-7 packet classification into 16 receive queuesPrint Server software with the selectable USB port and the LPC interface allows quick and inexpensive addition of a network printer
Transmit acceleration by TCP segmentation, IP fragmentation and TCP/IP/UDP checksum calculationComprehensive peripheral device interfaces such as UART and GPIO allow maximum flexibility in LCD, LED, and other slave device programming
Receive acceleration by TCP connection table lookup, assembly of multiple packets belonging to the same TCP connection and TC/IP/UDP checksum verificationEmbedded Real Time Clock enables easy system management
Hardware Security Acceleration Engine performs DES, 3DES, AES, CCMP and RC4 encryption/decryption with CBC or ECB mode operation; authentication with SHA1, MD5, HMAC-SHA1 and HMAC-MD5 hashing algorithmPCI bus interface to support external peripheral components such as 802.11a/g/n modules and MPEG codec
Hardware 32-bit true random number generatorIntelligent and programmable power management control module supports full power, idle, standby, and shut-down mode to enable power sensitive designs such as hand-held and mobile applications
Includes HPI interface to support easy connection to merchant DSP semiconductor deviceInternal multi-PLL circuits simplify designs and requires a simple crystal (25 MHz) which reduces overall system cost.
32-bit PCI 2.2 bus interface at 66 MHz with four master device support 
Includes PCM and I2S/ I2C [p1] interfaces for direct connection to SLIC and audio codec modules 
Direct interface to standard LCD color display, up to VGA quality 
Intelligent and programmable power management 
Timer, GPIO, UART, Watch Dog Timer 
Embedded Real Time Clock for true server applications 
Integrated OSC/PLL circuits require single 25 MHz crystal 
0.13um standard CMOS with approximately 1.3 W dissipation 
Low cost and small foot print 400-ball PBGA 
Technical Documents
Product Briefs
CS3516 Product Brief
Product Change Notifications
PCN400735 Storm Semiconductor, Inc. SL3316, SL3512 & SL3516 Product Mark and Part Number Change, PCN400735, FYI 2008-Sep-03
DCL400717 Doing Business with Cortina Systems: Instructions 2008-Aug-19