LXT386 - Quad T1/E1/J1 Transceiver Note - Not recommended for new designs

The LXT386 is a quad 3.3V short-haul Pulse Code Modulation (PCM) transceiver for use in either 1.544 Mbps (T1 or J1) or 2.048 Mbps (E1) applications. It incorporates four receivers and four transmitters in a single 100-pin LQFP or 160 PBGA package. The LXT386 provides the Cortina "Hitless Protection Switching" (HPS) feature and an advanced crystal-less Jitter Attenuator (JA) that meets CTR12/13 and the latest SONET/SDH requirements. You can configure the LXT386 as a three-channel transceiver with the additional channel configured as a G.772-compliant nonintrusive performance monitor. With the introduction of its LXT38x series, Cortina offers a transceiver that supports G.772 nonintrusive performance monitoring. This feature allows one channel to eavesdrop on other channels for remote monitoring and debugging purposes without interrupting service.

Applications
  • SONET/SDH tributary interfaces
  • Digital cross connects
  • Public/private switching trunk line interfaces
  • Microwave transmission systems
  • M13, E1-E3 MUX
    • Features and Benefits
  • Single rail 3.3V supply with 5V tolerant inputs
  • Low power consumption of 150 mW per channel (typical)
  • Superior crystal-less jitter attenuator
    • Meets ETSI CTR12/13, ITU G.736, G.742, G.823 and AT&T Pub 62411 specifications
    • Optimized for SONET/SDH applications, meets ITU G.783 mapping jitter specification
    • Constant throughput delay jitter attenuator
  • Cortina "Hitless Protection Switching" (HPS) for 1 to 1 protection without relays
  • HDB3, B8ZS, or AMI line encoder/decoder
  • Provides protected monitoring points per ITU G.772
  • Analog/digital and remote loopback testing functions
  • LOS per ITU G.775, ETS 300 233 and T1.231
  • 8 bit parallel or 4 wire serial control interface
  • Hardware and Software control modes
  • JTAG Boundary Scan test port per IEEE 1149.1
  • 160 PBGA and 100 pin LQFP packages
    • Product Change Notifications
    PCN105028 - 01 Conversion to RoHS Compliant Products 2006-Apr-05
    PCN106766 - 02 Ethernet Phy, MAC, Framers, T1/E1, Legacy Phy and Framers - Product Marking and Packaging Change, Product Marking 2006-Oct-12
    PCN0107-02.1 Ethernet Phy, MAC, Framers, T1/E1, Legacy Phy and Framers - Product Marking Change 2007-Jan-24
    PCN0707-04.0 LXT360, LXT380, LXT384, LXT386 & LXT971; Manufacturing Site 2007-Jul-23
    DCL200711-01 Early Shipments due to IT Shutdown and Conversion 2007-Nov-06
    DCL0108-01.0 Product Code Change 2008-Jan-04
    DCL200802-01.0 Cortina Systems, Inc. Products (Ethernet Phy, MAC, Framers, T1/E1, Transport and Legacy Phy, & EPON), DCL200802-01.0; FYI – Europe & Middle Eastern Region Orders and Payment Transition 2008-Feb-05
    PCN0308-04.0 Cortina Systems, Pack Change, Select QFP's 2008-Mar-25
    PCN0308-01.0 Cortina Systems, Product Marking Change, FYI 2008-Mar-13
    DCL200804-01 Cortina Systems, Inc. Products (Ethernet Phy, MAC, Framers, T1/E1, Transport and Legacy Phy, & EPON), ; FYI – Latin America Regions Order and Payment Transition, DCL200804-01 2008-Apr-14